A 15mm fibre cement board covers the applications 12 mm cannot and 18 mm over-serves: light mezzanine decks at close joist centres, stair treads and risers, counter and vanity substrates, blast-and-impact partitions and lift-shaft linings. OZIANT lists WedgeCem 15 mm boards in 2400 x 1200 mm sheets from Wedge Industries Limited, in CB16 high-density grade as standard, 100% non-asbestos and autoclave-cured.
Customs data for the period analysed prices 15 mm export consignments around US$14.40 per sheet at mid volumes, and this listing’s indicative FOB band of US$12.20-14.90 per sheet reflects that trade. At 1500-1600 kg/m3 the CB16 board delivers 22 MPa dry bending strength and 1200 N screw withdrawal — enough for a 400 mm-centre light deck or a partition that takes hospital trolley impacts without denting.
What we supply — 15mm Fibre Cement Board
The following lines are available under this 15mm fibre cement board listing from Wedge Industries Limited’s WedgeCem and WedgeClad board range. Each can be quoted separately; mixed orders and mixed-thickness container loads are welcome once the minimum order quantity is met.
- 2400 x 1200 x 15 mm CB16 — flooring and heavy partition grade
- 1215 x 615 x 15 mm half-panels for stair treads and access floors
- CB14 grade 15 mm for economical heavy partitions
- Tongue-and-groove edge for floating floor systems
- Square edge for screw-down decks and linings
- Sanded face for vinyl, carpet and epoxy finishes
- Cut-to-size tread, riser and counter blanks on request
- Mixed containers with 18 mm and 12 mm boards at the same bands
Specifications
| Parameter | Detail |
|---|---|
| Sheet size | 2400 x 1200 mm (+/- 3 mm); 1215 x 615 mm half-panels on order |
| Thickness | 15 mm (+/- 0.6 mm) |
| Density | 1500-1600 kg/m3 (CB16 standard) |
| Bending strength | 22 MPa dry / 16 MPa wet (ASTM C1185) |
| Fire performance | Non-combustible A1, BS 476 Part 4; 60-minute rated assemblies |
| Sheet weight | approx. 65 kg (CB16) |
| Screw withdrawal | 1200 N |
| Span guidance | 400 mm centres at 3 kN/m2; 600 mm for storage of light goods (project check advised) |
| HS code | 68118200 — 6811 82 00 — non-asbestos fibre cement boards and sheets |
| Minimum order | 350 sheets (one 20 ft container at 26 t is about 410 sheets) |
| Lead time | 18-25 days after order confirmation |
| Sample | Free 300 x 300 mm cut samples; courier at cost (US$35-60 by zone) (5-7 days) |
Indicative FOB price ladder (USD)
| Order quantity (sheets) | Indicative FOB price |
|---|---|
| 350 – 1,199 | US$ 14.90 per sheet |
| 1,200 – 3,599 | US$ 13.60 per sheet |
| 3,600+ | US$ 12.20 per sheet |
Prices on this 15mm fibre cement board listing are indicative FOB India (Nhava Sheva, Mundra or Chennai) as at 31-08-2026 and are quoted in US dollars; the final quotation depends on grade, size mix, packing and cement and fibre prices on the order date. The lowest band applies at 3,600+ sheets. Request a firm quote through the enquiry form and a Wedge Industries Limited sales engineer will respond within 24 hours.
Export compliance & duty — included in the price
Every shipment from this 15mm fibre cement board listing is prepared for the destination market by ZJELL Limited, the Wedge Group’s export-consulting company, so that documentation is never the reason a consignment is delayed. The following are included or arranged:
- 100% non-asbestos (chrysotile-free) declaration with every shipment
- ISO 8336:2006 type-test report and batch mill test certificate
- ASTM C1185 flexural strength certificate per batch
- EN 13501-1 A1 classification report — arranged by ZJELL Limited
- CE marking support to EN 12467 for EU and UK buyers
- Third-party pre-shipment inspection (SGS / BV / Intertek) on request
Import duty position (verify with your broker before ordering): UK: India-UK CETA in force from 15-07-2026 — 6811 lines at 0%. USA: HTS 6811.82 MFN free; the 10% reciprocal tariff on Indian goods (from 24-07-2026) still prices India below China. GCC: 5% common external tariff. EU: low single-digit MFN; India-EU FTA not yet in force.
Between partition and deck — where 15 mm earns its place
Fifteen millimetre is the thickness importers order when a project mixes floors and walls in one container: it decks a light mezzanine at 400 mm centres and doubles as the impact wall board in the same fit-out, cutting the SKU count a site has to manage. The 1215 x 615 mm half-panel — a size that appears repeatedly in Indian export records — turns the same board into stair treads and access-floor infill.
WedgeCem 15 mm boards are autoclave-cured CB16 as standard: density 1500-1600 kg/m3, batch-tested bending strength, and pallet batch numbers tied to the mill test certificate that ships with your documents.
Packing, containers & shipping
Sheets ship 30-40 per pallet with edge protection and double strapping. A 20 ft container takes about 410 sheets (26 t). Supervised loading with photo report before sealing.
| Pack detail | Specification |
|---|---|
| Pallet / container load | Pallets of 30-40 sheets; approx. 410 x 2400 x 1200 x 15 mm sheets per 20 ft container (26 t) |
| Ports | Nhava Sheva (JNPT), Mundra, Chennai, Tuticorin and Kolkata; ICD Tughlakabad and Dadri by rail |
| Incoterms | FOB standard; CIF, CFR and DAP quoted on request |
| Payment | 30% advance and balance against documents, or irrevocable LC at sight; CAD for repeat buyers |
Markets we serve
The UAE and Saudi Arabia for mezzanine and stair packages; the UK for loft decks; Australia for flooring substrates; East Africa for institutional buildings and workshop floors. Buyers choose the 15mm fibre cement board listed on OZIANT because the supplier has been vetted, the compliance cost is already in the price and every enquiry is answered within 24 hours.
See the OZIANT country guides for United States buyers, United Kingdom buyers, German buyers and UAE buyers in the Building Materials category.
Why buy this 15mm fibre cement board through OZIANT
- Vetted supplier — Wedge Industries Limited is a Category Leader on OZIANT with a published profile, manufacturing bases in four countries and an export track record in 45+ markets.
- Compliance-included pricing — classification reports, test certificates and destination labelling are arranged by ZJELL Limited, not left to the buyer.
- One accountable exporter for the whole board range — consolidate this line with the other fibre cement listings on this supplier’s profile in a single container.
- 24-hour response and a sample-before-bulk process for every order.
The full range in one document: all twenty export-grade SKUs with weights and formats, the technical property table for grades WedgeCB13, CB14 and CB16, standards and certification scope, finish codes, packing and container quantities, and the fixing guide.
Download the PDF cataloguePDF · 17 pages · 1.2 MBHow to order
- Send an enquiry from this page with your target quantity, destination port and thickness schedule or cutting list.
- Receive a firm FOB quotation and compliance checklist from Wedge Industries Limited within 24 hours.
- Approve samples — Free 300 x 300 mm cut samples; courier at cost (US$35-60 by zone); sample lead time 5-7 days.
- Confirm the order with a proforma invoice; production and documentation begin on receipt of advance or LC.
- Pre-shipment inspection report, loading photographs and mill test certificates are shared before dispatch; lead time 18-25 days after order confirmation.
- Documents (invoice, packing list, bill of lading, certificate of origin, test reports and classification certificates) are couriered or released against payment.
About the supplier — Wedge Industries Limited
Wedge Industries Limited, the manufacturer behind this 15mm fibre cement board listing, is a Category Leader supplier on OZIANT and the parent company of the Wedge Group, which also includes ZJELL Limited, an export and import consulting firm with offices in Delhi, London and Hong Kong. Wedge Industries Limited manufactures WedgeCem fibre cement boards, WedgeClad facade panels and a wider building-materials range — calcium silicate boards, MgO boards, gypsum boards, insulation and passive fire protection — from bases in India, the United Kingdom, Spain and China, and serves customers in more than 45 countries.
Browse the full Building Materials category or the supplier’s other fibre cement listings, or contact OZIANT for a sourcing brief across several building-material lines in one container.
Frequently asked questions
When should I choose 15mm fibre cement board over 18mm?
When joists run at 400 mm centres or the deck carries office-type rather than storage loads, 15 mm saves about 13 kg per sheet and roughly 15% cost. At 600 mm centres or under storage loading, order the 18 mm listing instead. Span tables ship with every quotation.
Is 15mm fibre cement board good for stair treads?
Yes — the 1215 x 615 mm half-panel cuts into two treads with minimal waste, and CB16 density resists nosing wear. For public buildings pair with an anti-slip nosing profile; the board takes countersunk screw fixing without pre-drilling failure.
Can it be used as a kitchen counter substrate?
Yes. 15 mm CB16 is a common substrate for tiled and stone-topped counters and vanities in hotels — dimensionally stable, unaffected by water, and non-combustible next to cooklines.
What edge profiles are available?
Square edge as standard, tongue-and-groove for glued floating decks, and sanded-face boards for direct vinyl or epoxy. State the edge profile on your enquiry; both run at the same price band.
How do I get a firm FOB quote for this 15mm fibre cement board?
Use the enquiry form on this page with your quantity, thickness schedule and destination. Wedge Industries Limited replies within 24 hours with an FOB quotation, the compliance checklist for your market and a sample offer.
Listing updated 31-08-2026. Wedge Industries Limited · Kw: 15mm fibre cement board · SKU OZ-WI-FCB-007.
Building Materials, Panels & Boards
Prices are FOB India and exclude freight, insurance and destination duty. Larger volumes are negotiable — send your quantity for a firm quotation.
- Minimum order
- 350 sheets (one 20 ft container at 26 t is about 410 sheets)
- Lead time
- 18-25 days after order confirmation
- HS code
- 68118200
- Certifications
- 100% non-asbestos (chrysotile-free) declaration with every shipment; ISO 8336:2006 type-test report and batch mill test certificate; ASTM C1185 flexural strength certificate per batch; EN 13501-1 A1 classification report
Supplied by Wedge Industries Limited · Gurugram, Haryana
US MFN plus 10% under Section 301. IMPORTANT: steel, aluminium and copper content instead falls under Section 232 at 50%, with no relief route — confirm the tariff line before quoting.
Verified 09-08-2026. Confirm against your own tariff line before committing to a landed cost.
Buyers pay no fee. Your requirement goes to at most 5 matched suppliers — never the whole directory.
Specification
| Sheet size | 2400 x 1200 mm (+/- 3 mm); 1215 x 615 mm half-panels on order |
|---|---|
| Thickness | 15 mm (+/- 0.6 mm) |
| Density | 1500-1600 kg/m3 (CB16 standard) |
| Bending strength | 22 MPa dry / 16 MPa wet (ASTM C1185) |
| Fire performance | Non-combustible A1, BS 476 Part 4; 60-minute rated assemblies |
| Sheet weight | approx. 65 kg (CB16) |
| Screw withdrawal | 1200 N |
| Span guidance | 400 mm centres at 3 kN/m2; 600 mm for storage of light goods (project check advised) |
| Material | 2400 x 1200 mm (+/- 3 mm); 1215 x 615 mm half-panels on order; 15 mm (+/- 0.6 mm) |
| Packing | Pallets of 30-40 sheets; approx. 410 x 2400 x 1200 x 15 mm sheets per 20 ft container (26 t) |
More from Wedge Industries Limited
Hydrated Lime Supplier in India — Ca(OH)₂ 90% min, Bulk Bagged
FOB US$92
Industrial Minerals Supplier in India — Clays, Feldspar and Lime in One Container
FOB US$38
Quicklime Exporter in India — CaO 85–92%, Steel and Sugar Grades
FOB US$72
Request a sample
US$Free 300 x 300 mm cut samples; courier at cost (US$35-60 by zone) per sample, 5-7 days. Sample cost is normally credited against your first production order — confirm with the supplier when they quote.
Request a quotation
Tell us the quantity and destination. Verified suppliers reply with an FOB quotation, usually within 5–10 days.