A 12mm fibre cement board is the specification most partition and sheathing systems are written around: thick enough for a 60-minute fire-rated wall in a single layer each side, stiff enough for door frames and wall cabinets, and still light enough for a two-man lift. OZIANT lists export-grade WedgeCem 12 mm boards in 2400 x 1200 mm sheets from Wedge Industries Limited, in CB14 general-purpose and CB16 high-density grades.
The 12 mm sheet is the board of choice for hotel and hospital partitions, shaft walls, external sheathing behind ACP and stone cladding, and wet-area lining where gypsum fails. Boards are 100% non-asbestos, autoclave-cured and tested to ISO 8336:2006 and ASTM C1185, with fire performance to Class A1 and surface spread of flame Class 1. Indicative FOB pricing is US$9.30-11.40 per sheet; matching 9 mm and 6 mm boards are listed separately on this profile for mixed container loads.
What we supply — 12mm Fibre Cement Board
The following lines are available under this 12mm fibre cement board listing from Wedge Industries Limited’s WedgeCem and WedgeClad board range. Each can be quoted separately; mixed orders and mixed-thickness container loads are welcome once the minimum order quantity is met.
- 2400 x 1200 x 12 mm CB14 — general partition and sheathing grade
- CB16 high-density grade for impact-rated corridors and public buildings
- Tapered edge for flush-jointed dry wall finishes
- Square edge for express-jointed and cover-strip systems
- Sanded face for tiling and direct decoration
- Pre-primed face for paint-grade partitions
- Cut-to-size riser and bulkhead panels on request
- Matching 6 mm / 9 mm boards for ceilings and linings in the same container
Specifications
| Parameter | Detail |
|---|---|
| Sheet size | 2400 x 1200 mm (+/- 3 mm, ISO 8336: Pass) |
| Thickness | 12 mm (+/- 0.5 mm) |
| Density | 1450 kg/m3 (CB14) or 1500-1600 kg/m3 (CB16) |
| Fire performance | Non-combustible A1, BS 476 Part 4; 60 min rated at 12 mm in tested assemblies |
| Bending strength | 15-22 MPa dry / 12-16 MPa wet |
| Sheet weight | approx. 50 kg (CB14) |
| Acoustic | 51 dB systems achievable with mineral wool infill |
| Water & frost | Warm water, soak-dry ISO 8336: Pass; 25 freeze-thaw cycles; suitable for wet areas |
| HS code | 68118200 — 6811 82 00 — non-asbestos fibre cement boards and sheets |
| Minimum order | 450 sheets (about one 20 ft container at 26 t is 500 sheets) |
| Lead time | 15-25 days after order confirmation |
| Sample | Free 300 x 300 mm cut samples; courier at cost (US$35-60 by zone) (5-7 days) |
Indicative FOB price ladder (USD)
| Order quantity (sheets) | Indicative FOB price |
|---|---|
| 450 – 1,499 | US$ 11.40 per sheet |
| 1,500 – 4,499 | US$ 10.40 per sheet |
| 4,500+ | US$ 9.30 per sheet |
Prices on this 12mm fibre cement board listing are indicative FOB India (Nhava Sheva, Mundra or Chennai) as at 31-08-2026 and are quoted in US dollars; the final quotation depends on grade, size mix, packing and cement and fibre prices on the order date. The lowest band applies at 4,500+ sheets. Request a firm quote through the enquiry form and a Wedge Industries Limited sales engineer will respond within 24 hours.
Export compliance & duty — included in the price
Every shipment from this 12mm fibre cement board listing is prepared for the destination market by ZJELL Limited, the Wedge Group’s export-consulting company, so that documentation is never the reason a consignment is delayed. The following are included or arranged:
- 100% non-asbestos (chrysotile-free) declaration with every shipment
- ISO 8336:2006 type-test report and batch mill test certificate
- ASTM C1185 flexural strength certificate per batch
- EN 13501-1 A1 classification and 60-minute system test references — arranged by ZJELL Limited
- CE marking support to EN 12467 for EU and UK buyers
- MSDS (GHS), certificate of origin and packing list with every consignment
Import duty position (verify with your broker before ordering): UK: India-UK CETA in force from 15-07-2026 — 6811 lines at 0%. USA: HTS 6811.82 MFN free; the 10% reciprocal tariff on Indian goods (from 24-07-2026) still prices India below China. GCC: 5% common external tariff. EU: low single-digit MFN; India-EU FTA not yet in force.
The 60-minute partition standard
Indian customs data for the period analysed shows 12 mm among the top three thicknesses by export value, driven by Gulf high-rise partition packages and African institutional projects. It is the thickness at which fibre cement replaces two layers of gypsum board, saving labour and cavity width on every linear metre of wall.
WedgeCem 12 mm boards are produced on Hatschek lines, autoclave-cured and conditioned to 6-8% moisture before packing. Batch testing covers density, bending strength and tolerance; the pallet batch number ties to the mill test certificate in your shipping documents.
Packing, containers & shipping
Sheets ship 50 per pallet, poly-wrapped with edge protection and strapping. A 20 ft container takes about 500 sheets (26 t). Supervised loading with photo report before sealing.
| Pack detail | Specification |
|---|---|
| Pallet / container load | Pallets of 50 sheets; approx. 500 x 2400 x 1200 x 12 mm sheets per 20 ft container (26 t) |
| Ports | Nhava Sheva (JNPT), Mundra, Chennai, Tuticorin and Kolkata; ICD Tughlakabad and Dadri by rail |
| Incoterms | FOB standard; CIF, CFR and DAP quoted on request |
| Payment | 30% advance and balance against documents, or irrevocable LC at sight; CAD for repeat buyers |
Markets we serve
The UAE, Saudi Arabia and Qatar for high-rise partitions and shaft walls; Nepal for institutional buildings; Nigeria, Kenya and Tanzania for schools and hospitals; the UK for sheathing behind rainscreen cladding. Buyers choose the 12mm fibre cement board listed on OZIANT because the supplier has been vetted, the compliance cost is already in the price and every enquiry is answered within 24 hours.
See the OZIANT country guides for United States buyers, United Kingdom buyers, German buyers and UAE buyers in the Building Materials category.
Why buy this 12mm fibre cement board through OZIANT
- Vetted supplier — Wedge Industries Limited is a Category Leader on OZIANT with a published profile, manufacturing bases in four countries and an export track record in 45+ markets.
- Compliance-included pricing — classification reports, test certificates and destination labelling are arranged by ZJELL Limited, not left to the buyer.
- One accountable exporter for the whole board range — consolidate this line with the other fibre cement listings on this supplier’s profile in a single container.
- 24-hour response and a sample-before-bulk process for every order.
The full range in one document: all twenty export-grade SKUs with weights and formats, the technical property table for grades WedgeCB13, CB14 and CB16, standards and certification scope, finish codes, packing and container quantities, and the fixing guide.
Download the PDF cataloguePDF · 17 pages · 1.2 MBHow to order
- Send an enquiry from this page with your target quantity, destination port and thickness schedule or cutting list.
- Receive a firm FOB quotation and compliance checklist from Wedge Industries Limited within 24 hours.
- Approve samples — Free 300 x 300 mm cut samples; courier at cost (US$35-60 by zone); sample lead time 5-7 days.
- Confirm the order with a proforma invoice; production and documentation begin on receipt of advance or LC.
- Pre-shipment inspection report, loading photographs and mill test certificates are shared before dispatch; lead time 15-25 days after order confirmation.
- Documents (invoice, packing list, bill of lading, certificate of origin, test reports and classification certificates) are couriered or released against payment.
About the supplier — Wedge Industries Limited
Wedge Industries Limited, the manufacturer behind this 12mm fibre cement board listing, is a Category Leader supplier on OZIANT and the parent company of the Wedge Group, which also includes ZJELL Limited, an export and import consulting firm with offices in Delhi, London and Hong Kong. Wedge Industries Limited manufactures WedgeCem fibre cement boards, WedgeClad facade panels and a wider building-materials range — calcium silicate boards, MgO boards, gypsum boards, insulation and passive fire protection — from bases in India, the United Kingdom, Spain and China, and serves customers in more than 45 countries.
Browse the full Building Materials category or the supplier’s other fibre cement listings, or contact OZIANT for a sourcing brief across several building-material lines in one container.
Frequently asked questions
Is 12mm fibre cement board suitable for wet areas and bathrooms?
Yes — it is the standard wet-area board. Warm-water and soak-dry performance pass ISO 8336, the board does not soften like gypsum, and tiles bond directly to the sanded face with standard C2 adhesives. Waterproof the joints and penetrations as per any tiled wall.
Can a 12mm fibre cement board wall achieve 60 minutes fire rating?
Yes. In tested stud assemblies a single 12 mm layer each side with mineral wool infill achieves 60 minutes. The board itself is non-combustible Class A1, so it contributes no fuel. System test references are shared with the compliance pack for your market.
What stud spacing does a 12mm board need?
600 mm centres for standard partitions and 400 mm for tiled or impact-rated walls. The board takes wall cabinets and sanitary fixtures with standard cavity fixings — 1200 N screw withdrawal — without extra noggins in most cases.
Can I use the same board as external sheathing?
Yes. 12 mm CB14/CB16 is used as sheathing behind ventilated rainscreen, ACP and stone cladding. It is frost-tested to 25 cycles; for fully exposed facade faces see the fibre cement cladding board listing on this profile.
How do I get a firm FOB quote for this 12mm fibre cement board?
Use the enquiry form on this page with your quantity, thickness schedule and destination. Wedge Industries Limited replies within 24 hours with an FOB quotation, the compliance checklist for your market and a sample offer.
Listing updated 31-08-2026. Wedge Industries Limited · Kw: 12mm fibre cement board · SKU OZ-WI-FCB-003.
Building Materials, Panels & Boards
Prices are FOB India and exclude freight, insurance and destination duty. Larger volumes are negotiable — send your quantity for a firm quotation.
- Minimum order
- 450 sheets (about one 20 ft container at 26 t is 500 sheets)
- Lead time
- 15-25 days after order confirmation
- HS code
- 68118200
- Certifications
- 100% non-asbestos (chrysotile-free) declaration with every shipment; ISO 8336:2006 type-test report and batch mill test certificate; ASTM C1185 flexural strength certificate per batch; EN 13501-1 A1 classification and 60-minute system test references
Supplied by Wedge Industries Limited · Gurugram, Haryana
US MFN plus 10% under Section 301. IMPORTANT: steel, aluminium and copper content instead falls under Section 232 at 50%, with no relief route — confirm the tariff line before quoting.
Verified 09-08-2026. Confirm against your own tariff line before committing to a landed cost.
Buyers pay no fee. Your requirement goes to at most 5 matched suppliers — never the whole directory.
Specification
| Sheet size | 2400 x 1200 mm (+/- 3 mm, ISO 8336: Pass) |
|---|---|
| Thickness | 12 mm (+/- 0.5 mm) |
| Density | 1450 kg/m3 (CB14) or 1500-1600 kg/m3 (CB16) |
| Fire performance | Non-combustible A1, BS 476 Part 4; 60 min rated at 12 mm in tested assemblies |
| Bending strength | 15-22 MPa dry / 12-16 MPa wet |
| Sheet weight | approx. 50 kg (CB14) |
| Acoustic | 51 dB systems achievable with mineral wool infill |
| Water & frost | Warm water, soak-dry ISO 8336: Pass; 25 freeze-thaw cycles; suitable for wet areas |
| Material | 2400 x 1200 mm (+/- 3 mm, ISO 8336: Pass); 12 mm (+/- 0.5 mm) |
| Packing | Pallets of 50 sheets; approx. 500 x 2400 x 1200 x 12 mm sheets per 20 ft container (26 t) |
More from Wedge Industries Limited
Hydrated Lime Supplier in India — Ca(OH)₂ 90% min, Bulk Bagged
FOB US$92
Industrial Minerals Supplier in India — Clays, Feldspar and Lime in One Container
FOB US$38
Quicklime Exporter in India — CaO 85–92%, Steel and Sugar Grades
FOB US$72
Request a sample
US$Free 300 x 300 mm cut samples; courier at cost (US$35-60 by zone) per sample, 5-7 days. Sample cost is normally credited against your first production order — confirm with the supplier when they quote.
Request a quotation
Tell us the quantity and destination. Verified suppliers reply with an FOB quotation, usually within 5–10 days.