A fire rated fibre cement board earns its rating by composition: WedgeCem boards are Portland cement, quartz and cellulose — Euroclass A1 non-combustible to EN 13501-1 and BS 476 Part 4 — so there is no fire-retardant treatment to leach out, age or fail an audit. OZIANT lists fire-classified WedgeCem boards from Wedge Industries Limited for 60-120 minute wall, shaft, ceiling and structural-protection systems, in 6-20 mm thicknesses.
Since the cladding-fire reforms in the UK, the Gulf civil-defence codes and India’s own tightening National Building Code, non-combustibility has moved from preference to law on escape routes, shafts, kitchens and high-rise walls. A single 12 mm WedgeCem layer each side of a mineral-wool-filled stud achieves 60 minutes; double-layer systems reach 120. Indicative FOB pricing is US$9.20-12.80 per sheet — with the classification paperwork, not just the claim, in the document set.
What we supply — Fire Rated Fibre Cement Board
The following lines are available under this fire rated fibre cement board listing from Wedge Industries Limited’s WedgeCem and WedgeClad board range. Each can be quoted separately; mixed orders and mixed-thickness container loads are welcome once the minimum order quantity is met.
- 12 mm — the 60-minute single-layer system board
- 2 x 12 mm double-layer systems for 120-minute walls
- 9 mm for fire-rated ceilings and membranes
- 6 mm for duct and steel-protection encasement layers
- 15-20 mm for fire-rated floors and shaft decks
- Shaft-wall configurations for risers and lift shafts
- Kitchen and plant-room lining boards
- Cut-to-size encasement strips for structural steel on request
Specifications
| Parameter | Detail |
|---|---|
| Reaction to fire | Euroclass A1 non-combustible (EN 13501-1); BS 476 Part 4 non-combustible |
| Surface spread of flame | Class 1 (BS 476 Part 7) |
| System ratings | 60 min at 1 x 12 mm per side; 120 min at 2 x 12 mm per side (tested stud assemblies with mineral wool) |
| Fire resistance of board | 60 minutes integrity at 12 mm |
| Sheet sizes | 2400 x 1200 mm standard; 2440 x 1220 and 3000 x 1200 mm on order |
| Thicknesses | 6 / 9 / 12 / 15 / 18 / 20 mm |
| Density | 1450-1600 kg/m3 |
| Composition | Portland cement, quartz, cellulose — no asbestos, no organic fillers above 2% |
| HS code | 68118200 — 6811 82 00 — non-asbestos fibre cement boards; fire-classified boards ship under the same line with classification reports |
| Minimum order | 400 sheets (one 20 ft container at 26 t) |
| Lead time | 18-25 days after order confirmation |
| Sample | Free 300 x 300 mm cut samples with classification documents; courier at cost (US$35-60 by zone) (5-7 days) |
Indicative FOB price ladder (USD)
| Order quantity (sheets) | Indicative FOB price |
|---|---|
| 400 – 1,399 | US$ 12.80 per sheet |
| 1,400 – 3,999 | US$ 10.90 per sheet |
| 4,000+ | US$ 9.20 per sheet |
Prices on this fire rated fibre cement board listing are indicative FOB India (Nhava Sheva, Mundra or Chennai) as at 31-08-2026 and are quoted in US dollars; the final quotation depends on grade, size mix, packing and cement and fibre prices on the order date. The lowest band applies at 4,000+ sheets. Request a firm quote through the enquiry form and a Wedge Industries Limited sales engineer will respond within 24 hours.
Export compliance & duty — included in the price
Every shipment from this fire rated fibre cement board listing is prepared for the destination market by ZJELL Limited, the Wedge Group’s export-consulting company, so that documentation is never the reason a consignment is delayed. The following are included or arranged:
- EN 13501-1 Euroclass A1 classification report — the document UK and EU building control asks for first
- BS 476 Part 4 non-combustibility certificate
- 60/120-minute system test references for tested assemblies
- 100% non-asbestos (chrysotile-free) declaration
- UAE / Saudi civil defence documentation support — arranged by ZJELL Limited
- Mill test certificate, MSDS and certificate of origin with every consignment
Import duty position (verify with your broker before ordering): UK: India-UK CETA in force from 15-07-2026 — 6811 lines at 0%. USA: HTS 6811.82 MFN free; the 10% reciprocal tariff on Indian goods (from 24-07-2026) still prices India below China. GCC: 5% common external tariff — civil defence approval matters more than duty here. EU: low single-digit MFN; India-EU FTA not yet in force.
Non-combustible by composition, not by treatment
Fire documentation is where board suppliers are separated: a board that is ‘fire resistant’ in a brochure but has no classification report is unsellable to a UK contractor post-Grenfell or a Dubai contractor under UAE Fire and Life Safety Code. Every consignment on this listing ships with the A1 classification report, the BS 476 certificate and the system test references your approving authority will ask for.
Wedge Industries Limited also manufactures passive fire protection products — intumescent seals, fire door boards and fire-stopping — so fire-rated boards ship with a supplier who understands the approval chain, not just the board. ZJELL Limited assembles the civil-defence submission pack for Gulf projects.
Packing, containers & shipping
Sheets ship 50 per pallet, poly-wrapped with edge protection and strapping, classification documents in the document pouch of container one. A 20 ft container takes about 500 x 12 mm sheets (26 t).
| Pack detail | Specification |
|---|---|
| Pallet / container load | Pallets of 50 sheets; approx. 500 x 2400 x 1200 x 12 mm sheets per 20 ft container (26 t) |
| Ports | Nhava Sheva (JNPT), Mundra, Chennai, Tuticorin and Kolkata; ICD Tughlakabad and Dadri by rail |
| Incoterms | FOB standard; CIF, CFR and DAP quoted on request |
| Payment | 30% advance and balance against documents, or irrevocable LC at sight; CAD for repeat buyers |
Markets we serve
The UAE, Saudi Arabia and Qatar for civil-defence-regulated projects; the UK for escape routes and shafts post-cladding reforms; Singapore and Hong Kong for high-rise fit-outs; India-based EPC contractors buying for overseas sites. Buyers choose the fire rated fibre cement board listed on OZIANT because the supplier has been vetted, the compliance cost is already in the price and every enquiry is answered within 24 hours.
See the OZIANT country guides for United States buyers, United Kingdom buyers, German buyers and UAE buyers in the Building Materials category.
Why buy this fire rated fibre cement board through OZIANT
- Vetted supplier — Wedge Industries Limited is a Category Leader on OZIANT with a published profile, manufacturing bases in four countries and an export track record in 45+ markets.
- Compliance-included pricing — classification reports, test certificates and destination labelling are arranged by ZJELL Limited, not left to the buyer.
- One accountable exporter for the whole board range — consolidate this line with the other fibre cement listings on this supplier’s profile in a single container.
- 24-hour response and a sample-before-bulk process for every order.
The full range in one document: all twenty export-grade SKUs with weights and formats, the technical property table for grades WedgeCB13, CB14 and CB16, standards and certification scope, finish codes, packing and container quantities, and the fixing guide.
Download the PDF cataloguePDF · 17 pages · 1.2 MBHow to order
- Send an enquiry from this page with your target quantity, destination port and thickness schedule or cutting list.
- Receive a firm FOB quotation and compliance checklist from Wedge Industries Limited within 24 hours.
- Approve samples — Free 300 x 300 mm cut samples with classification documents; courier at cost (US$35-60 by zone); sample lead time 5-7 days.
- Confirm the order with a proforma invoice; production and documentation begin on receipt of advance or LC.
- Pre-shipment inspection report, loading photographs and mill test certificates are shared before dispatch; lead time 18-25 days after order confirmation.
- Documents (invoice, packing list, bill of lading, certificate of origin, test reports and classification certificates) are couriered or released against payment.
About the supplier — Wedge Industries Limited
Wedge Industries Limited, the manufacturer behind this fire rated fibre cement board listing, is a Category Leader supplier on OZIANT and the parent company of the Wedge Group, which also includes ZJELL Limited, an export and import consulting firm with offices in Delhi, London and Hong Kong. Wedge Industries Limited manufactures WedgeCem fibre cement boards, WedgeClad facade panels and a wider building-materials range — calcium silicate boards, MgO boards, gypsum boards, insulation and passive fire protection — from bases in India, the United Kingdom, Spain and China, and serves customers in more than 45 countries.
Browse the full Building Materials category or the supplier’s other fibre cement listings, or contact OZIANT for a sourcing brief across several building-material lines in one container.
Frequently asked questions
What fire rating does the board itself have?
The board is Euroclass A1 non-combustible — the highest reaction-to-fire class, meaning it contributes no fuel. Fire resistance (60/120 minutes) is a property of the tested wall or ceiling assembly; a single 12 mm layer each side of a mineral-wool stud achieves 60 minutes, double layers 120. We supply both the A1 report and the system references.
Is a fire rated fibre cement board the same as calcium silicate board?
They compete in the same systems. Fibre cement is denser and stronger, handles moisture better and costs less per sheet; calcium silicate is lighter with better insulation at thickness. Wedge Industries Limited manufactures both — ask for the comparison sheet if your specification allows either.
Do you support UAE civil defence submittals?
Yes — ZJELL Limited assembles the submittal pack: classification reports, system references, material declarations and manufacturer letters in the format UAE and Saudi civil defence reviewers expect. This is included in the compliance-included price.
Can the board encase structural steel?
Yes — 6-12 mm boards are used as box encasement for steel columns and beams, with thickness selected from the section factor and required rating. Send the steel schedule with your enquiry and we return the encasement thickness table with the quotation.
How do I get a firm FOB quote for this fire rated fibre cement board?
Use the enquiry form on this page with your quantity, thickness schedule and destination. Wedge Industries Limited replies within 24 hours with an FOB quotation, the compliance checklist for your market and a sample offer.
Listing updated 31-08-2026. Wedge Industries Limited · Kw: fire rated fibre cement board · SKU OZ-WI-FCB-016.
Building Materials, Panels & Boards
Prices are FOB India and exclude freight, insurance and destination duty. Larger volumes are negotiable — send your quantity for a firm quotation.
- Minimum order
- 400 sheets (one 20 ft container at 26 t)
- Lead time
- 18-25 days after order confirmation
- HS code
- 68118200
- Certifications
- EN 13501-1 Euroclass A1 classification report; BS 476 Part 4 non-combustibility certificate; 60/120-minute system test references for tested assemblies; 100% non-asbestos (chrysotile-free) declaration
Supplied by Wedge Industries Limited · Gurugram, Haryana
US MFN plus 10% under Section 301. IMPORTANT: steel, aluminium and copper content instead falls under Section 232 at 50%, with no relief route — confirm the tariff line before quoting.
Verified 09-08-2026. Confirm against your own tariff line before committing to a landed cost.
Buyers pay no fee. Your requirement goes to at most 5 matched suppliers — never the whole directory.
Specification
| Reaction to fire | Euroclass A1 non-combustible (EN 13501-1); BS 476 Part 4 non-combustible |
|---|---|
| Surface spread of flame | Class 1 (BS 476 Part 7) |
| System ratings | 60 min at 1 x 12 mm per side; 120 min at 2 x 12 mm per side (tested stud assemblies with mineral wool) |
| Fire resistance of board | 60 minutes integrity at 12 mm |
| Sheet sizes | 2400 x 1200 mm standard; 2440 x 1220 and 3000 x 1200 mm on order |
| Thicknesses | 6 / 9 / 12 / 15 / 18 / 20 mm |
| Density | 1450-1600 kg/m3 |
| Composition | Portland cement, quartz, cellulose — no asbestos, no organic fillers above 2% |
| Material | Euroclass A1 non-combustible (EN 13501-1); BS 476 Part 4 non-combustible; Class 1 (BS 476 Part 7) |
| Packing | Pallets of 50 sheets; approx. 500 x 2400 x 1200 x 12 mm sheets per 20 ft container (26 t) |
More from Wedge Industries Limited
Hydrated Lime Supplier in India — Ca(OH)₂ 90% min, Bulk Bagged
FOB US$92
Industrial Minerals Supplier in India — Clays, Feldspar and Lime in One Container
FOB US$38
Quicklime Exporter in India — CaO 85–92%, Steel and Sugar Grades
FOB US$72
Request a sample
US$Free 300 x 300 mm cut samples with classification documents; courier at cost (US$35-60 by zone) per sample, 5-7 days. Sample cost is normally credited against your first production order — confirm with the supplier when they quote.
Request a quotation
Tell us the quantity and destination. Verified suppliers reply with an FOB quotation, usually within 5–10 days.